UL 962户外家具认证标签要求
返回列表
来源： 原创
发布日期：2022-02-09
今天这篇文章，主要简单介绍下UL 962家具户外家具标签部分的内容。
97.1 A furnishing that complies with the requirements in Sections 81 – 96 and that is intended for use in outdoors is able to be marked ″Suitable for outdoor use.″
97.1 符合81-96节内容的家具产品，可以使用在户外环境中，可以在产品上打上“适用于户外”
97.2 A furnishing intended for use within 4 feet (1.22 m) of the ground and that complies with the sprinkler test shall be marked as follows: ″Suitable (for mounting) within 4 feet of the ground″
97.2 使用环境低于1.22米的户外家具，需要标记：“适用于低于1.22m”
97.3 The markings of 97.1 and 97.2 shall be on an exterior surface that will normally be visible after the furnishing is installed, except that, in the case of residential furnishings only, the marking is not prohibited from being at a point where it will be visible when making and inspecting the connections to the branch-circuit supply wires. The marking is regarded as visible after the furnishing is installed when only the removal of the lamp, glassware, or a drop canopy is required to make the marking visible. The markings shall be on the exterior of the residential furnishing when applicable.
97.3 97.1和97.2的标记应在一个外表面,通常是可见的家具安装后,除此之外,在住宅中家具,标记不禁止在一个点,在制作和检查时可见分支电路供应连接电线。当只需要拆卸灯、玻璃器皿或伞盖就可以使标记可见时，标记在安装后被认为是可见的。如适用，这些标记应在住宅陈设的外部。
97.4 A furnishing with adjustable mounting or alternative mounting positions, and a furnishing provided with an open reflector, shall be marked to indicate the limits of adjustment or mounting position necessary to comply with test requirements.
97.4 具有可调节安装或可选择安装位置的家具，并提供一种家具带有开口反射器，应标明调整的极限或必要的安装位置符合测试要求。
97.5 A furnishing that is not intended for ground installation shall be marked to indicate the appropriate installation.
97.5 不打算用于地面安装的陈设应加以标记，以表明适当的安装.
97.6 The markings in 97.4 and 97.5 shall be on the furnishing in the form of a pressure-sensitive label, decalcomania transfer, paper label, paint-ink or die-stamped lettering. A tie-on tab, stuffer sheet, or equivalent does not meet the intent of these requirements. The markings shall be where visible during or after installation.
97.6 97.4和97.5中的标记应以压敏标签的形式出现在设备上，贴花转印、纸质标签、油漆油墨或模压印刷。领带标签，填充物表，或者等价物不满足这些需求的意图。标记应在或期间可见的地方后安装。
今天关于UL962的分享就到这结束了，欢迎大家关注苏州德立弗检测技术服务有限公司，一起学习UL962相关知识，谢谢！
全国服务热线
苏州市虎丘区科灵路78号软件园5号楼102室
Joey.Zhang@szdeliver.com
0512-66801969
德立弗检测